PPS (Polyphenylene Sulfide):
It is a thermoplastic crystalline polymer with a maximum crystallinity of 65%, making it the leading high-temperature engineering plastic. Pure resin is a white/coffee-colored material, which is difficult to process due to its high viscosity
If it is fluid and cannot be injection molded, injection-grade PPS can be obtained by adding fillers and modifiers for modification.
There are two types: cross-linked (branched structure) and linear (linear structure). Cross-linked resins are brittle, have good heat resistance and creep resistance, and can be directly extruded and granulated into plastics. Linear resins have high relative molecular mass, excellent toughness and extensibility, further improved comprehensive performance, and better processing performance.
Heat resistance: The melting point exceeds 280℃, the heat distortion temperature under a load of 1.8MPa is above 260℃, and the long-term use temperature is 220-240℃

PPS characteristics:

Processing performance: Good fluidity, suitable for various processing methods; after fiber reinforcement, it can still be injection molded into complex thin-walled parts

Flame retardancy: It can achieve UL94-V0 and 5VA levels (no drips) without the need to add flame retardants, and produces low smoke during combustion
-Mechanical properties: After being reinforced with glass fiber or carbon fiber, or filled with minerals, the strength and rigidity are doubled, and it exhibits excellent creep resistance and fatigue resistance

Chemical resistance: second only to polytetrafluoroethylene, it is insoluble in any organic solvents below 200℃ (except for strong oxidizing acids); it exhibits strong resistance to inorganic acids, alkalis, and salts, and is very stable to various types of radiation
-Dimensional stability: After lamination, the molding shrinkage rate is low, less than 0.0025%, and the absorption rate is less than 0.05%. The linear thermal expansion coefficient is small, and it still exhibits good dimensional stability under high temperature and high humidity conditions

PPS	modified category	Proportion of main additives	Product designation	Description of supporting services
	extruded pipe	universal	SQ286 SGEX GP	It can replace relevant products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with small orders being shipped within 4-24 hours after payment, and large orders being delivered across the country within 7-15 working days. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding brand of the same performance from major foreign manufacturers. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		high viscosity	SQ286 SGEX LMF
		+Teflon	SQ286 SGEX PF
	Fiberglass reinforced	30%	SQ286 G6
		30%，+Teflon	SQ286 G6 PF
		40%	SQ286 G8
		40%，toughening	SQ286 G8 ST
		+mineral，65%	SG286 GM13
	carbon fiber reinforced	10%	SQ286 C2
		30%	SQ286 C6
		30%，+Teflon	SQ286 C6 PF

PPA (polyphthalamide):

A semi-crystalline, thermoplastic aromatic polyamide, commonly known as aromatic high-temperature nylon, can withstand long-term operating temperatures up to 180℃ and short-term temperatures up to 290℃. The aromatic component in the molecular structure of PPA ensures that parts made from PPA exhibit excellent performance in terms of heat, electricity, physical properties, and chemical resistance, particularly maintaining high strength and excellent dimensional stability under high-temperature conditions.

Advantages of PPA:

PPA plastics also exhibit superior surface glossiness. They can be colored without the need for surface coating, which helps reduce the visibility of surface scratches and marks.

PPA has higher thermal stability than PA46

PPA exhibits superior CTI/arc resistance and infrared reflow capability compared to PA46

PPA has better chemical resistance than PA46

PPA exhibits superior performance in strength, toughness, and hardness, as well as excellent heat resistance, chemical resistance, and crack resistance

PPA can maintain its strength and hardness even under high temperature and high humidity conditions, making it a viable replacement for metal in applications where traditional nylons and polyesters cannot be used

PPA	modified category	Proportion of main additives	Product designation	Description of supporting services
	Fiberglass reinforced	15%	SQ266 G3	It can replace relevant products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with shipment within 4-24 hours after a small payment, and nationwide delivery within 7-15 working days for larger orders. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding brand of major foreign manufacturers with the same performance. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		30%	SQ266 G6
		33%	SQ266 G6.6
		35%	SQ266 G7
	thermal stability	35%	SQ266 G7 HS
		45%	SQ266 G9 HS
		50%	SQ266 G10 HS
	hydrolysis-resistant	35%	SQ266 G7 AH
	Welding Specialized	35%	SQ266 G7 WD
	food-grade	35%	SQ266 G7 F
	carbon fiber reinforced	30%	SQ266 C6
	halogen-free flame retardant	20%	SQ266 G4 HFFR
		30%	SQ266 G6 HFFR
		45%	SQ266 G9 HFFR
		55%	SQ266 G11 HFFR
	brominated flame retardant	30%	SQ266 G6 BFR
		45%	SQ266 G9 BFR

PEI (Polyetherimide):

PEI plastic is an amorphous thermoplastic polyetherimide, combining high performance with excellent processing characteristics. It exhibits high temperature resistance, along with high strength, modulus, and a wide range of chemical resistance.

PEI characteristics:

Chemical stability: Excellent hydrolytic stability; resistant to high temperatures and steam; exhibits good corrosion resistance to various chemicals, including gasoline fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions;
-Electrical properties: Outstanding electrical performance; stable dielectric constant (as low as 3.15) and dielectric loss, as well as extremely high dielectric strength across a wide range of frequencies and temperatures; electrical insulation;
-Weather resistance
-Radiation resistance: radiation resistance; excellent resistance to ultraviolet rays and Y-rays; high microwave permeability; transparent and non-absorbent to visible light, infrared light, and microwave radiation
-Processability: low shrinkage rate, good isotropic mechanical properties;

Physical properties: amorphous; good dimensional stability; low creep sensitivity; small and uniform coefficient of thermal expansion; excellent strength-to-weight ratio; very good resistance to staining;

Mechanical properties: high impact strength; excellent ductility; fatigue resistance, long-term creep resistance

Heat resistance: High temperature stability; very high long-term heat resistance, with a heat distortion temperature of 220°C; glass transition temperature (Tg) of 217°C, HDT/Ae of 190°C, suitable for long-term use at operating temperatures ranging from -160°C to 180°C, with an allowable intermittent maximum use temperature of 200°C; thermal conductivity of 0.22W/m/K

Combustion performance: Excellent natural flame retardancy; low smoke emission, no need to add flame retardants;

PEI	modified category	Proportion of main additives	Product designation	Description of supporting services
	pure resin	universal	SQ212 NAT	It can replace relevant products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with small orders being shipped within 4-24 hours after payment, and large orders being delivered nationwide within 7-15 working days. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding brand of the same performance from major foreign manufacturers. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		economic specifications	SQ212 NAT ECO
		medical specifications	SQ212 NAT MED
	Fiberglass reinforced	10%	SQ212 G2
		20%	SQ212 G4
		30%	SQ212 G6
		40%	SQ212 G8
	carbon fiber reinforced	10%	SQ212 C2
		20%	SQ212 C4
		30%，+Teflon	SQ212 C6 PF

● PEI SQ212 polyetherimide

1. Over 15 years of application development history
2. Certifications such as ROHS/FDA/REACH can be provided upon request
3. There are various subdivided application products of PEI
4. We have inventory in both East China and South China, with a minimum order quantity (MOQ) of 5kg and a normal delivery time within one week
5. Equipped with a diverse range of analytical experimental devices, capable of conducting reversible analysis and subsequently producing identical materials
6. We can provide PEI plastic granules, PEI sheets, and PEI rods

● PEI plastic: the top performer among transparent plastics

1. High and low temperature stability
   The glass transition temperature reaches 217℃, the heat distortion temperature is between 210℃ and 220℃, and the long-term use temperature range is from -160℃ to 180℃
2. Excellent mechanical properties
   The tensile strength of non-reinforced PEI is above 105 MPa, the flexural modulus reaches 3.300 MPa, and the notched impact strength (without notch) can reach 1270 J/m. After reinforcement modification (such as adding glass fibers), the torsional strength is significantly improved, making it a cheap alternative to small steel parts.
3. Excellent resistance to chemical corrosion and UV rays
   It can withstand various organic solvents, acid and alkali corrosion, and is particularly suitable for applications such as automotive headlamp reflectors that require long-term exposure to ultraviolet rays. 4. Flame retardant and insulating properties
   With an oxygen index of 47%, a combustion rating of UL94-V0, low dielectric constant, and radiation resistance, it is suitable for electronic components.
4. Processing and transparency
   It has good formability and a light transmittance of up to 90%, making it suitable for scenarios requiring high transparency.

● SQ212 offers a wide range of PEI subdivision applications

1. Pure PEI particles with various flowabilities
2. Glass fiber reinforced modified PEI in various proportions
3. Carbon fiber reinforced modified PEI with various proportions
4. PEI reinforced with PTFE in various proportions
5. Antistatically modified PEI
6. PEI with ultra-high dimensional stability and extremely low linear expansion coefficient
7. Colored PEI: formulated in various colors
8. Carbon nanotube-enhanced PEI
9. Electromagnetic wave shielding PEI
10. Aramid-reinforced PEI
11. Multi-component hybrid reinforced polyethylene imide (PEI)
12. Ultra-high density and ultra-heavy PEI
13. Conductive PEI
    As well as various specifications of PEI rods, PEI sheets, and PEI tubes

● Introduction to the subdivided product of Plastiq PEISQ212

1. Pure material
   SUQING PEI SQ212 MF GP
   General specification for medium flowability suitable for injection molding and extrusion: MI=9 (ASTM D1238, 330℃, 6.6kgf) SUQING PEI SQ212 HF GP
   Suitable for thin-walled injection molding with high flowability. General specification: MI=18 (ASTM D1238, 330℃, 6.6kgf)
2. Glass fiber reinforced modified PEI in various proportions, regular shipping specifications:
   SUQING PEI SQ212 G2 HF
   10% glass fiber reinforcement
   SUQING PEI SQ212 G4 HF
   20% glass fiber reinforcement
   SUQING PEI SQ212 G5 ST
   25% glass fiber reinforced, super tough
   SUQING PEI SQ212 G6 HF
   30% glass fiber reinforcement
3. % glass fiber reinforced carbon fiber reinforced modified PEI, regular shipping specifications:
   SUQING PEI SQ212 C2 GP
   10% carbon fiber reinforcement: flexural modulus of 7500MPa, flexural strength of 230MPa
   SUQING PEI SQ212 C4 GP
   20% carbon fiber reinforcement: flexural modulus of 14500 MPa, flexural strength of 270 MPa
   SUQING PEI SQ212C6GP
   30% carbon fiber reinforcement: flexural modulus of 22000MPa, flexural strength of 290MPa
   SUQING PEISQ212 C8
   40% carbon fiber reinforcement: flexural modulus of 27000 MPa, tensile modulus of 30000 MPa
4. PTFE-reinforced and modified PEI in various proportions, regular shipping specifications:
   SUQING PEI SQ212 PF1
   5% PTFE reinforcement: self-lubricating
   SUQING PEI SQ212 PF2
   10% PTFE reinforcement: self-lubricating
   SUQING PEI SQ212 PF3
   15% PTFE reinforcement: self-lubricating
5. Color PEI for the fiber optic connector industry, regular shipping specifications:
   SUQING PEI SQ212 OTCM ECO
   Medium fluidity, specially formulated for color matching in the optical communication industry
6. Multi-component hybrid reinforced PEI, regular shipping specifications:
   SUQING PEI SQ212 G4 PF3
   20% glass fiber reinforcement + 15% PTFE reinforcement, excellent strength and wear resistance
   SUQING PEI SQ212 G6 PF3
   30% glass fiber reinforcement + 15% PTFE reinforcement, boasting excellent strength and wear resistance SUQING PEI SQ212 G4 C2
   20% glass fiber reinforcement + 10% carbon fiber reinforcement: excellent strength and wear resistance SUQING PEI SQ212 G6 C2
   30% glass fiber reinforcement + 10% carbon fiber reinforcement: excellent strength and wear resistance

● SQ212 has a wide range of PEI subdivision applications
PEI plastic raw material SQ212

1. Pure PEI particles with various flowabilities
2. Glass fiber reinforced modified PEI in various proportions
3. Carbon fiber reinforced modified PEI with various proportions
4. PTFE-reinforced PEI with various proportions
5. Anti-static modified PEI
6. PEI with ultra-high dimensional stability and extremely low linear expansion coefficient
7. Colored PE: mixed into various colors
8. Carbon nanotube-enhanced PEI
9. Electromagnetic wave shielding PEI
10. Aramid-reinforced PEI
11. Polyethyleneimine (PEI) enhanced by multiple component mixtures
12. Ultra-high density and ultra-heavy PEI
13. Conductive PEI
    As well as various specifications of PEI rods, PEI sheets, and PEI tubes

PA46 (polyhexamethylene adipamide):

PA46 is formed through the polycondensation of 1,4-diaminobutane (also known as butanediamine, abbreviated as DAB) and adipic acid. Its molecular structure is highly symmetrical, endowing it with characteristics such as high melting point, high crystallinity, high strength, strong rigidity, as well as resistance to high temperatures, fatigue, and wear. Additionally, it boasts a short molding cycle, making processing more economical.

Compared to PA6 and PA66, PA46 has a melting point of around 300℃, which is 40℃ higher than that of PA66 and 80℃ higher than that of PA6. Its melting point is the highest among all nylon resins. Its comprehensive performance surpasses most competing products, such as PA6, PA66, PPA, and PPS. Its wear resistance can even reach 7 times that of PA66.

Compared with other industrialized high-temperature resistant nylons (nylon engineering plastics that can be used at temperatures above 150°C for extended periods), such as PA6T and PA9T, PA46 possesses excellent characteristics that give it significant advantages in terms of cost reduction, extended service life, and reliability.

In terms of ease of processing and design, PA46 also exhibits similar performance to high-temperature resins such as LCP, PPS, and PEEK.

PA46	modified category	Proportion of main additives	Product designation	Description of supporting services
	Pure resin, heat-stable and self-lubricating	-，Injection Molding	SQ126 IJ	It can replace relevant products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with small orders being shipped within 4-24 hours after payment, and large orders being delivered across the country within 7-15 working days. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding brand of major foreign companies with the same performance. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		-，extrude	SQ126 EX
	Fiberglass reinforced	15%	SQ126 G3
		25%	SQ126 G5
		30%	SQ126 G6
		40%	SQ126 G8
		50%	SQ126 G10
		60%	SQ126 G12
	Glass fiber reinforced, fireproof	30%	SQ126 G6 FR
		35%	SQ126 G7 FR
		40%	SQ126 G8 FR
		45%	SQ126 G9 FR
		50%	SQ126 G10 FR
	carbon fiber reinforced	15%-40%	SQ126 C3-C8
	Teflon reinforced
		+15%fiberglass	SQ126 G3 PF
		+30%fiberglass	SQ126 G6 PF
		+15%carbon fiber	SQ126 C3 PF
		+30%carbon fiber	SQ126 C6 PF
		+5%aramid	SQ126 K1 PF2

PA9T (poly(p-phenylene terephthalamide)):
The main advantages include:

It can achieve the 94V-0 effect at a thickness of 0.75mm

Easy to process: good fluidity, thermal stability, and low mold corrosion;

High lubricity: Its wear resistance and friction coefficient are significantly better than other nylons, even surpassing POM and LCP

Low water absorption rate (1%, compared to over 2.6% for other common high-temperature nylons).

High thermal stability: PA9T, with its high glass transition temperature (125°C) and high crystallinity, maintains good toughness at high temperatures, outperforming PA66 and PA46. It is a low-warpage, high-dimensional stability material.

Another excellent performance of PA9T is its resistance to chemicals, oils, alcohols, acids, calcium chloride, hot water, and other fluids, which surpasses almost all PAs and is only slightly inferior to PPS. Its barrier properties to fuel are ten times that of PA6 and PA12, approaching the level of ETFE (ethylene-tetrafluoroethylene copolymer). These excellent properties make PA9T highly suitable for automotive hood products.

PA9T	modified category	Proportion of main additives	Product designation	Description of supporting services
	Fiberglass reinforced	30%	SQ160 G6	It can replace relevant products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with small orders being shipped within 4-24 hours after payment, and large orders being delivered nationwide within 7-15 working days. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding brand of the same performance from major foreign manufacturers. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		35%	SQ160 G7
	fire preventionV0	30%，halogen-free	SQ160 G6 FR HF
		30%	SQ160 G6 FR
		33%	SQ160 G6.6 FR
		45%	SQ160 G9 FR

PEEK (Polyetheretherketone):

Polyetheretherketone (PEEK) exhibits excellent heat resistance. At 1.8 MPa, its heat distortion temperature is 160°C. When reinforced with 20% to 30% glass fiber, the heat distortion temperature can be increased to 280~330°C. PEEK experiences only a 2% weight loss in air at 420°C for 2 hours, and a 2.5% weight loss at 500°C. The long-term use temperature of modified PEEK is approximately 260-300°C.

Polyetheretherketone exhibits excellent electrical insulation properties, with a volume resistivity of approximately 10^10 Ω·cm. It maintains a low dielectric constant and dielectric loss within the high-frequency range. For instance, at 10 Hz and room temperature, its dielectric constant is merely 3.2, and its dielectric loss is only 0.02.

Polyetheretherketone exhibits excellent chemical stability, being highly resistant to almost all chemical reagents except concentrated sulfuric acid, and maintaining good chemical stability even at elevated temperatures. Furthermore, it possesses exceptional resistance to hot water and steam, allowing for prolonged use in steam at temperatures ranging from 200 to 250 ℃.

Polyetheretherketone (PEEK) exhibits excellent flame retardancy, making it difficult to ignite under typical conditions. Even if it does ignite, the amount of smoke and harmful gas released is very low, even lower than that of low-smoke polymers such as polytetrafluoroethylene (PTFE).

Polyetheretherketone (PEEK) exhibits excellent radiation resistance. Its resistance to alpha, beta, and gamma rays is currently the best among polymer materials. Wire products coated with PEEK can withstand 1.1×10 Gy of gamma rays.

Polyetheretherketone (PEEK) exhibits good melt flowability and thermal stability above its melting point (343°C). As a result, it possesses typical molding processability of thermoplastics, allowing for various forming methods such as injection molding, extrusion, blow molding, and lamination, as well as spinning and film making. Although the melting processing temperature range of PEEK is 360~400°C, its thermal decomposition temperature is above 520°C, thus providing a wide processing temperature range.

PEEK	modified category	Proportion of main additives	Product designation	Description of supporting services
	Ultra-high cost-effectiveness, 30% glass fiber reinforcement	economic specifications	SQ210 G6 GP ECO-O	It can replace related products of the same specifications and performance from abroad, with technical parameters and indicators achieving over 90% similarity, and individual indicators may even surpass those of major foreign brands. 2. Generally, products are available in stock, with small orders being shipped within 4-24 hours after payment, and large orders being delivered nationwide within 7-15 working days. 3. Color matching can be arranged according to customer needs, and engineers can be arranged to conduct on-site color matching. 4. We promise that the product price is at least 10% cheaper than the corresponding grades of major foreign brands with the same performance. 5. The minimum order quantity can be as low as 25kg. 6. This table only lists some of our mass-produced products. For more mass-produced products, please consult the corresponding sales engineer
		low-cost specification	SQ210 G6 GP ECO-R
	Plating specifications	30%fiberglass	SQ210 G6 MPP
	Fiberglass reinforced	10%	SQ210 G2
		20%	SQ210 G4
		30%	SQ210 G6
		40%	SQ210 G8
	carbon fiber reinforced	10%	SQ210 C2
		20%	SQ210 C4
		30%，+Teflon	SQ210 C6 PF

● PEEK SQ210 polyetheretherketone
Advantages: We promise to offer prices at least 20% lower than foreign brands while maintaining the same quality!

1. Over 15 years of application development history.
2. Certifications such as ROHS/FDA/REACH can be provided upon request.
3. There are 16 types of PEEK subdivision application products.
4. We have inventory in both East China and South China. The minimum order quantity (MOQ) is 5kg, and the delivery time is normally within one week
5. Equipped with a wide range of analytical experimental devices, capable of conducting reversible analysis and subsequently producing identical materials.
6. We can provide PEEK plastic granules, PEEK plates, and PEEK rods.

● PEEK plastic: the almost all-around plastic king

1. Extreme heat resistance: Long-term temperature tolerance of 260-300℃, with an instantaneous maximum temperature tolerance of 380℃.
2. Superior mechanical properties: Pure PEEK exhibits a tensile strength of 90-100MPa, while it can reach 250-300MPa after being reinforced with carbon fiber (comparable to ADC12 cast aluminum alloy).
3. High wear resistance and self-lubricating: The friction coefficient is as low as 0.17-0.24, with an extreme PV value of 4MPa·m/s, and the wear rate is only 1/6 of that of PTFE.
4. Excellent chemical resistance: It is resistant to almost all organic solvents, strong acids and alkalis (except concentrated sulfuric acid), and its corrosion resistance is close to that of steel.
5. Lightweight and low density: With a density of only 1.3-1.4g/cm³ (1/6 of steel and 1/2 of aluminum), carbon fiber reinforcement maintains a density of 1.45g/cm³, achieving a significant weight reduction effect.
6. Multi-functional protective properties: Flame retardant and self-extinguishing: UL94V-0 rating, oxygen index of 35%, low smoke and non-toxic during combustion; Radiation resistance: Tolerant to 107Gy radiation, suitable for nuclear industry; High insulation: Stable dielectric constant (3.2-3.3), withstand voltage >2300V, compatible with 800V high-voltage motors.

● SQ210 has a wide range of PEEK subdivision applications
PEEK plastic raw material SQ210

1. PEEK powder
2. Pure PEEK particles with various flowabilities
3. Glass fiber reinforced modified PEEK in various proportions
4. Carbon fiber reinforced modified PEEK with various proportions
5. PEEK reinforced with PTFE in various proportions
   PEEK6 modified for resistance to ultra-high/ultra-low temperatures
6. Antistatically modified PEEK
7. PEEK with ultra-high dimensional stability and extremely low linear expansion coefficient
8. Colored PEEK: mixed into various colors
9. Ceramic-reinforced PEEK
10. Carbon nanotube-reinforced PEEK
11. Aramid-reinforced PEEK
12. Electromagnetic wave shielding PEEK
13. PEEK reinforced by multiple component mixtures
14. Ultra-high density and ultra-heavy PEEK
15. Thermally conductive PEEK

● Introduction to the subdivision product of PEEK SQ210

1. Pure material
   SUQING PEEK SQ210 MF GP
   General specification for medium flowability suitable for injection molding and extrusion: MI=20 (ISO1133, 380℃, 5kgf)
   SUQING PEEK SQ210 LF GP
   General specification for high viscosity suitable for extrusion: MI=10 (ISO1133, 380℃, 5kgf)
   SUQING PEEK SQ210 HF GP
   Suitable for thin-walled injection molding with high flowability. General specification: M=80 (ISO1133, 380℃, 5kgf)
2. Various proportions of glass fiber reinforced modified PEEK, regular shipping specifications:
   SUQING PEEK SQ210 MF G3 GP
   15% glass fiber reinforcement: MI=11 (ISO1133, 380℃, 5kgf)
   SUQING PEEK SQ210 HF G3 GP
   15% glass fiber reinforced high flowability: M=28 (ISO1133, 380℃, 5kgf)
   SUQING PEEK SQ210 G6 BD
   30% glass fiber reinforced high viscosity: MI=80 (ISO1133, 380℃, 5kgf)
3. Carbon fiber reinforced modified PEEK in various proportions, regular shipping specifications
   SUQING PEEK SQ210 C2 GP
   10% carbon fiber reinforcement: flexural modulus of 7000MPa, flexural strength of 200MPa
   SUQING PEEK SQ210 C6 GP
   30% carbon fiber reinforcement: flexural modulus of 24000MPa, flexural strength of 380MPa
   SUQING PEEK SQ210 C8 MMF
   40% carbon fiber reinforcement: flexural modulus of 30000MPa, tensile modulus of 35000MPa
4. PTFE-reinforced and modified PEEK in various proportions, available in standard shipping specifications
   SUQING PEEK SQ210 PF1 HF5%PTFE Reinforced: High Flow, Self-lubricating
   SUQING PEEK SQ210 PF3 MF15%PTFE reinforcement: medium fluidity, self-lubricating
   SUQING PEEK SQ210 PF3 HF15%PTFE reinforcement: high flow, self-lubricating
5. PEEK modified for resistance to ultra-high/ultra-low temperatures, regular shipping specifications:
   SUQING PEEK SQ210 G6 HT
   30% glass fiber reinforcement: medium fluidity, heat distortion temperature up to 360℃, 1.8MPa
   SUQING PEEK SQ210 MF HT
   Unreinforced high-temperature granules: medium fluidity, heat distortion temperature up to 170℃, 1.8MPa
   SUQING PEEK SQ210 C6 HT
   30% glass fiber reinforcement: medium fluidity, heat distortion temperature up to 380℃, 1.8MPa
6. Multi-component hybrid reinforced PEEK, regular shipping specifications
   SUQING PEEK SQ210 C6 PF3
   30% glass fiber reinforcement + 15% PTFE reinforcement, with excellent strength and wear resistance, SUQING PEEK SQ210 AF3 PF3
   15% aramid reinforcement + 15% PTFE reinforcement, offering exceptional strength and wear resistance
   SUQING PEEK SQ210 G6 PF3
   30% glass fiber reinforcement + 15% PTFE reinforcement: excellent strength and wear resistance

● SQ210 has a wide range of PEEK application segments

1. Antistatically modified PEEK
2. PEEK with ultra-high dimensional stability and extremely low linear expansion coefficient
3. Colored PEEK: available in various colors
4. Ceramic-reinforced PEEK
5. Carbon nanotube-reinforced PEEK
6. Aramid-reinforced PEEK
7. Electromagnetic wave shielding PEEK
8. PEEK reinforced by multiple component blends
9. Ultra-high density and ultra-heavy PEEK
10. Thermally conductive PEEK

PA66 (Polyhexamethylenediamine), PA6 (Polycaprolactam):

PA66 and PA6 are the most widely produced and sold products of our company. In terms of these two categories, our company has a wide range of mass-produced products in the following directions:

High temperature resistance improvement

Fiberglass reinforcement: 5% -50%

Super tough modification

Pure flame retardant and halogen-free flame retardant, glass fiber reinforced flame retardant (red phosphorus and bromine based) and halogen-free flame retardant

Carbon fiber reinforcement and flame retardancy

Aramid fiber reinforcement

Hydrolysis resistant modification

PC (polycarbonate):

PC modified engineering plastics are another product produced and sold in large quantities by our company. In terms of this category, our company has a wide range of mass-produced products in the following directions:

1. Fiberglass reinforcement: 5% -40%
2. Ultra tough and resistant to low temperature impact (minimum -60 ℃) modification, suitable for both fire-resistant and non fire-resistant applications
3. Pure transparent and opaque flame retardant and halogen-free flame retardant, glass fiber reinforced flame retardant and halogen-free flame retardant (flowability of 3-30 is available)
4. Infrared penetration modification, anti UV 400nm modification
5. Carbon fiber reinforcement and flame retardancy
6. Scratch resistant 1H-3H modification (no need for oil injection processing, injection molding can achieve 3H)
7. High temperature resistance improvement (temperature resistance of 150 ℃ -215 ℃)

PEI SQ212 polyetherimide

1. Over 15 years of application development history
2. ROHS/FDA/REACH certifications can be provided as needed
3. There are multiple segmented application products available
4. We have inventory in both East and South China, MOQ5kg， Normal delivery time within one week
5. There are abundant and diverse analytical experimental equipment, which can be reverse analyzed to produce the same material

● Transparent PC

1. Medical grade, transparent PC compliant with ISO 10993
2. Transparent PC that meets ultra-thin flame-retardant V0: 1.0mm, 2.0mm
3. Transparent PC without PFAS
4. Transparent low-temperature impact PC resistant to -40 ℃
5. Transparent PC with good oil and chemical resistance
6. Transparent PC with ultra-high transmittance
7. Transparent PC that is particularly hydrophilic or hydrophobic
8. Transparent PC with ultra-high fluidity (MI>30) or ultra-high molecular weight (MI<3)
9. Transparent PC with anti-static power of 9-13
10. Transparent PC with long-term use temperature of 150-190 ℃
11. Can only pass through PC with specified wavelength (infrared penetration UV400nm、 Block other frequency bands)
12. Transparent PC with added fiberglass
13. Transparent PC with scratch resistant surface for 1H-4H
14. Ultra pure transparent PC with ultra-low precipitation for semiconductor applications

● Opaque PC

1. Opaque PC compliant with EN45545 European Railway Standard
2. Opaque PC with a surface resistance of 10 to the power of 3-13
3. Long term use of opaque PC with a temperature range of 150-190 ℃, which can be used for fire prevention or non fire prevention
4. Opaque PC with ultra-high glass fiber content, GF>40%
5. Ultra high flame retardant opaque PC: 1.5mm 5VA, 2.0mm 5VA, 1.0mm 5VB6, ultra-thin flame retardant opaque PC: 0.38mm V0, 0.7mm v0, 0.8mm Vo
6. Highly opaque PC with high light blocking and high reflection
7. Ultra cost-effective 1mm halogen-free V0 opaque PC
8. Opaque V2 VO PC without PFAS
9. Opaque PC with thermal conductivity of 0.8-15
10. Opaque PC with excellent chemical resistance (better than silicon PC):
11. Opaque PC for electromagnetic wave shielding
12. Laser engraving LDS dedicated PC
13. LDS specific opaque PC
14. Opaque PC without halogen V0 for inhibiting bacterial growth
15. Foam formed opaque PC
16. Opaque PC with ultra-high metal adhesion
17. Non spray opaque PC:
18. Opaque PC with self-lubricating surface
19. Electrical dedicated PC that complies with the latest national standard S.2

● PC/ABS

PC/ABS reinforced with 10% -50% talc powder

Ultra cost-effective medical ISO10993 fireproof PC/ABS

Anti static 10 ^ 9-13 power PC/ABS

Fireproof PC/ABS with a hot deformation temperature of 110 ℃

Compliant with UL94 VO+UL 746C F1 fire-resistant PC/ABS

Matte PC/ABS surface

PCABS specialized for electroplating

PC/ABS for electromagnetic wave, ultraviolet light, and signal shielding

PC/ABS with self-lubricating and low friction loss

PC/ABS with high surface hardness

Fireproof PC/ABS for inhibiting bacterial growth

Fireproof PC/ABS with high insulation coefficient

10% -40% glass fiber or carbon fiber reinforced PC/ABS